Difference between revisions of "Nanguiano Week 8"

From LMU BioDB 2015
Jump to: navigation, search
(→‎Perform statistical analysis on the ratios: finished statistical analysis)
(→‎Calculate the Bonferroni p value Correction: did Bonferroni correction)
Line 40: Line 40:
 
=== Calculate the Bonferroni p value Correction ===
 
=== Calculate the Bonferroni p value Correction ===
  
−
* Now we will perform adjustments to the p value to correct for the [https://xkcd.com/882/ multiple testing problem].  Label the next two columns to the right with the same label, Bonferroni_Pvalue.
+
* I labeled the next two columns to the right of the "Pvalue" column with the same label, "Bonferroni_Pvalue".
−
* Type the equation <code>=<(Pvalue>*5221</code>, Upon completion of this single computation, use the trick to copy the formula throughout the column.
+
* Under the first "Bonferroni_Pvalue" column, I typed the equation: <pre> =S2*5221 </pre>  
−
* Replace any corrected p value that is greater than 1 by the number 1 by typing the following formula into the first cell below the second Bonferroni_Pvalue header: <code>=IF(s2>1,1,s2)</code>.  Use the trick to copy the formula throughout the column.
+
* Then, I applied the formula to the whole column. In order to replace any corrected P value that was greater than 1 with the number 1, I typed the following formula under the header of the second "Bonferonni_Pvalue" column: <pre>=IF(s2>1,1,s2)</pre>.   
 +
* I applied the formula to the whole column.
  
 
=== Calculate the Benjamini & Hochberg p value Correction ===
 
=== Calculate the Benjamini & Hochberg p value Correction ===

Revision as of 22:38, 15 October 2015

Statistical Analysis of Vibrio cholerae Microarray Data (Part 1)

Normalize the log ratios for the set of slides in the experiment

  • First, I downloaded the data file from Open Wet Ware.
  • To scale and center the data (between chip normalization), I performed the following operations:
    • I inserted a new Worksheet into the Excel file, and name it "scaled_centered".
    • In the "compiled_raw_data" worksheet, I pressed Command + Ato select everything, and then copied it all. I pasted the information in the "scaled_centered" sheet.
    • I Inserted two rows in between the column headers and the first row of data.
    • I typed "Average" in cell A2 and "StdDev" in cell A3.
    • Now I needed to compute the Average Log Ration for each column. In cell B2, I typed the following equation: 
       =AVERAGE(B4:B5224)
    • To compute the Standard Deviation, I typed the following equation in cell B3: 
       =STDEV(B4:B5224)
    • To apply the formula to all of the columns, I dragged the small box on the bottom right-hand corner across each column to apply it to all columns.
    • Next, I copied the column headings and pasted them to the right of C4to create a second set of headers. I edited the names of the columns so they read: A1_scaled_centered, A2_scaled_centered, etc.
    • In cell N4 under the column titled "A1_scaled_centered", I typed the following equation: 
       =(B4-B$2)/B$3
    • I clicked cell N4, then double-clicked the small box on the bottom right when the cursor turned into a plus so that it applied to every row in the column.
    • I dragged the formula from N4 across the remaining columns to apply it to all of them, then applied the formula to all of the rows of the columns.

Perform statistical analysis on the ratios

  • To perform the statistical analysis, I performed the following steps:
    • First, I inserted a new worksheet and named it "statistics".
    • I copied the first column from the "scaled_centered" worksheet (the column titled ID), then pasted the column into the new sheet.
    • Back in the "scaled_centered" sheet, I copied all of the columns with "_scaled_centered" in the titles and pasted them using "Edit -> Paste Special -> Values" in the "statistics" sheet, starting at cell B1.
    • Then, I deleted rows 2 and 3 from "statistics" (Average/StdDev).
    • To the right of my "_scaled_centered" columns, I created three columns, titled "Avg_LogFC_A", "Avg_LogFC_B", and "Avg_LogFC_C".
    • To compute the average log fold change for the replicates, I typed in cell N2 under "Avg_LogFC_A" the equation: 
       =AVERAGE(B2:E2)
    • I applied the formula to the entire column, as well as to the next two columns.
    • Now I needed to computer the average of the averages. In the column after "Avg_LogFC_C", I created a new column titled "Avg_LogFC_all". Under the column header, I typed the equation: 
       =AVERAGE(N2:P2)
    • After applying the formula to the whole column, I created a new column called "Tstat" next to the "Avg_LogFC_all". Under this column header, I entered the following equation: 
       =AVERAGE(N2:P2)/(STDEV(N2:P2)/SQRT(3))
    • I then applied it to all rows in the column.
    • Next to the "Tstat" column, I labeled the next column "Pvalue". In the cell below the label, I entered the equation: 
       =TDIST(ABS(R2),2,2)
    • Then, I applied the formula to all of the rows in the column.

Calculate the Bonferroni p value Correction

  • I labeled the next two columns to the right of the "Pvalue" column with the same label, "Bonferroni_Pvalue".
  • Under the first "Bonferroni_Pvalue" column, I typed the equation: 
     =S2*5221
  • Then, I applied the formula to the whole column. In order to replace any corrected P value that was greater than 1 with the number 1, I typed the following formula under the header of the second "Bonferonni_Pvalue" column: 
    =IF(s2>1,1,s2)
    .
  • I applied the formula to the whole column.

Calculate the Benjamini & Hochberg p value Correction

  • Insert a new worksheet named "B-H_Pvalue".
  • Copy and paste the "ID" column from your previous worksheet into the first column of the new worksheet.
  • Insert a new column on the very left and name it "MasterIndex". We will create a numerical index of genes so that we can always sort them back into the same order.
    • Type a "1" in cell A2 and a "2" in cell A3.
    • Select both cells. Hover your mouse over the bottom-right corner of the selection until it makes a thin black + sign. Double-click on the + sign to fill the entire column with a series of numbers from 1 to 5221 (the number of genes on the microarray).
  • For the following, use Paste special > Paste values. Copy your unadjusted p values from your previous worksheet and paste it into Column C.
  • Select all of columns A, B, and C. Sort by ascending values on Column C. Click the sort button from A to Z on the toolbar, in the window that appears, sort by column C, smallest to largest.
  • Type the header "Rank" in cell D1. We will create a series of numbers in ascending order from 1 to 5221 in this column. This is the p value rank, smallest to largest. Type "1" into cell D2 and "2" into cell D3. Select both cells D2 and D3. Double-click on the plus sign on the lower right-hand corner of your selection to fill the column with a series of numbers from 1 to 5221.
  • Now you can calculate the Benjamini and Hochberg p value correction. Type B-H_Pvalue in cell E1. Type the following formula in cell E2: =(C2*5221)/D2 and press enter. Copy that equation to the entire column.
  • Type "B-H_Pvalue" into cell F1.
  • Type the following formula into cell F2: =IF(E2>1,1,E2) and press enter. Copy that equation to the entire column.
  • Select columns A through F. Now sort them by your MasterIndex in Column A in ascending order.
  • Copy column F and use Paste special > Paste values to paste it into the next column on the right of your "statistics" sheet.

Prepare file for GenMAPP

  • Insert a new worksheet and name it "forGenMAPP".
  • Go back to the "statistics" worksheet and Select All and Copy.
  • Go to your new sheet and click on cell A1 and select Paste Special, click on the Values radio button, and click OK. We will now format this worksheet for import into GenMAPP.
  • Select Columns B through Q (all the fold changes). Select the menu item Format > Cells. Under the number tab, select 2 decimal places. Click OK.
  • Select all the columns containing p values. Select the menu item Format > Cells. Under the number tab, select 4 decimal places. Click OK.
  • Delete the left-most Bonferroni p value column, preserving the one that shows the result of your "if" statement.
  • Insert a column to the right of the "ID" column. Type the header "SystemCode" into the top cell of this column. Fill the entire column (each cell) with the letter "N".
  • Select the menu item File > Save As, and choose "Text (Tab-delimited) (*.txt)" from the file type drop-down menu. Excel will make you click through a couple of warnings because it doesn't like you going all independent and choosing a different file type than the native .xls. This is OK. Your new *.txt file is now ready for import into GenMAPP. But before we do that, we want to know a few things about our data as shown in the next section.
    • Upload both the .xls and .txt files that you have just created to your journal page in the class wiki. Make sure that your file name is distinct from your other classmates so that nobody overwrites anyone else's file.

Sanity Check: Number of genes significantly changed

Before we move on to the GenMAPP/MAPPFinder analysis, we want to perform a sanity check to make sure that we performed our data analysis correctly. We are going to find out the number of genes that are significantly changed at various p value cut-offs and also compare our data analysis with the published results of Merrell et al. (2002).

  • Open your spreadsheet and go to the "forGenMAPP" tab.
  • Click on cell A1 and select the menu item Data > Filter > Autofilter. Little drop-down arrows should appear at the top of each column. This will enable us to filter the data according to criteria we set.
  • Click on the drop-down arrow on your "Pvalue" column. Select "Custom". In the window that appears, set a criterion that will filter your data so that the Pvalue has to be less than 0.05.
    • How many genes have p value < 0.05? and what is the percentage (out of 5221)?
    • What about p < 0.01? and what is the percentage (out of 5221)?
    • What about p < 0.001? and what is the percentage (out of 5221)?
    • What about p < 0.0001? and what is the percentage (out of 5221)?
  • When we use a p value cut-off of p < 0.05, what we are saying is that you would have seen a gene expression change that deviates this far from zero less than 5% of the time.
  • We have just performed 5221 T tests for significance. Another way to state what we are seeing with p < 0.05 is that we would expect to see this magnitude of a gene expression change in about 5% of our T tests, or 261 times. (Test your understanding: http://xkcd.com/882/.) Since we have more than 261 genes that pass this cut off, we know that some genes are significantly changed. However, we don't know which ones. To apply a more stringent criterion to our p values, we performed the Bonferroni and Benjamini and Hochberg corrections to these unadjusted p values. The Bonferroni correction is very stringent. The Benjamini-Hochberg correction is less stringent. To see this relationship, filter your data to determine the following:
    • How many genes are p < 0.05 for the Bonferroni-corrected p value? and what is the percentage (out of 5221)?
    • How many genes are p < 0.05 for the Benjamini and Hochberg-corrected p value? and what is the percentage (out of 5221)?
  • In summary, the p value cut-off should not be thought of as some magical number at which data becomes "significant". Instead, it is a moveable confidence level. If we want to be very confident of our data, use a small p value cut-off. If we are OK with being less confident about a gene expression change and want to include more genes in our analysis, we can use a larger p value cut-off.
  • The "Avg_LogFC_all" tells us the size of the gene expression change and in which direction. Positive values are increases relative to the control; negative values are decreases relative to the control.
    • Keeping the (unadjusted) "Pvalue" filter at p < 0.05, filter the "Avg_LogFC_all" column to show all genes with an average log fold change greater than zero. How many are there? (and %)
    • Keeping the (unadjusted) "Pvalue" filter at p < 0.05, filter the "Avg_LogFC_all" column to show all genes with an average log fold change less than zero. How many are there? (and %)
    • What about an average log fold change of > 0.25 and p < 0.05? (and %)
    • Or an average log fold change of < -0.25 and p < 0.05? (and %) (These are more realistic values for the fold change cut-offs because it represents about a 20% fold change which is about the level of detection of this technology.)
  • In summary, the p value cut-off should not be thought of as some magical number at which data becomes "significant". Instead, it is a moveable confidence level. If we want to be very confident of our data, use a small p value cut-off. If we are OK with being less confident about a gene expression change and want to include more genes in our analysis, we can use a larger p value cut-off. For the GenMAPP analysis below, we will use the fold change cut-off of greater than 0.25 or less than -0.25 and the unadjusted p value cut off of p < 0.05 for our analysis because we want to include several hundred genes in our analysis.
  • What criteria did Merrell et al. (2002) use to determine a significant gene expression change? How does it compare to our method?

Sanity Check: Compare individual genes with known data

  • Merrell et al. (2002) report that genes with IDs: VC0028, VC0941, VC0869, VC0051, VC0647, VC0468, VC2350, and VCA0583 were all significantly changed in their data. Look these genes up in your spreadsheet. What are their fold changes and p values? Are they significantly changed in our analysis?

MAPPFinder Analysis of Vibrio cholerae Microarray Data (Part 2)

Map Onto Biological Pathways (GenMAPP & MAPPFinder)

Each time you launch GenMAPP, you need to make sure that the correct Gene Database (.gdb) is loaded.

  • Look in the lower left-hand corner of the window to see which Gene Database has been selected.
  • If you need to change the Gene Database, select Data > Choose Gene Database. Navigate to the directory C:\GenMAPP 2 Data\Gene Databases and choose the correct one for your species.
  • For the exercise today, you will need to download the appropriate Vibrio cholerae Gene Database.
  • Click on the link for the Gene Database to which you have been assigned, download the file, and save it into the folder C:\GenMAPP 2 Data\Gene Databases, and extract it.

GenMAPP Expression Dataset Manager Procedure

  • Launch the GenMAPP Program. Check to make sure the correct Gene Database is loaded.
    • Look in the lower, left-hand corner of the main GenMAPP Drafting Board window to see the name of the Gene Database that is loaded. If this is not the correct Gene Database or it says "No Gene Database", then go to the Data > Choose Gene Database menu item to select the Gene Database you need to perform the analysis.
    • Remember, you and your partner are going to use different versions of the Vibrio cholerae Gene Database for this exercise.
  • Select the Data menu from the main Drafting Board window and choose Expression Dataset Manager from the drop-down list. The Expression Dataset Manager window will open.
  • Select New Dataset from the Expression Datasets menu. Select the tab-delimited text file that you formatted for GenMAPP (.txt) in the procedure above from the file dialog box that appears.
    • You may need to download your .txt file from the wiki onto your Desktop if you have not already done so.
  • The Data Type Specification window will appear. GenMAPP is expecting that you are providing numerical data. If any of your columns has text (character) data, you would check the box next to the field (column) name.
    • The Vibrio data we have been working with does not have any text (character) data in it.
  • Allow the Expression Dataset Manager to convert your data.
    • This may take a few minutes depending on the size of the dataset and the computer’s memory and processor speed. When the process is complete, the converted dataset will be active in the Expression Dataset Manager window and the file will be saved in the same folder the raw data file was in, named the same except with a .gex extension; for example, MyExperiment.gex.
    • A message may appear saying that the Expression Dataset Manager could not convert one or more lines of data. Lines that generate an error during the conversion of a raw data file are not added to the Expression Dataset. Instead, an exception file is created. The exception file is given the same name as your raw data file with .EX before the extension (e.g., MyExperiment.EX.txt). The exception file will contain all of your raw data, with the addition of a column named ~Error~. This column contains either error messages or, if the program finds no errors, a single space character.
      • Record the number of errors. For your journal assignment, open the .EX.txt file and use the Data > Filter > Autofilter function to determine what the errors were for the rows that were not converted. Record this information in your individual journal page.
      • It is likely that you will have a different number of errors than your partner who is using a different version of the Vibrio cholerae Gene Database. Which of you has more errors? Why do you think that is? Record your answers in your journal page.
      • Upload your exceptions file: EX.txt to your wiki page.
  • Customize the new Expression Dataset by creating new Color Sets which contain the instructions to GenMAPP for displaying data on MAPPs.
    • Color Sets contain the instructions to GenMAPP for displaying data from an Expression Dataset on MAPPs. Create a Color Set by filling in the following different fields in the Color Set area of the Expression Dataset Manager: a name for the Color Set, the gene value, and the criteria that determine how a gene object is colored on the MAPP. Enter a name in the Color Set Name field that is 20 characters or fewer.
    • The Gene Value is the data displayed next to the gene box on a MAPP. Select the column of data to be used as the Gene Value from the drop down list or select [none]. We will use "Avg_LogFC_all" for the Vibrio dataset you just created.
    • Activate the Criteria Builder by clicking the New button.
    • Enter a name for the criterion in the Label in Legend field.
    • Choose a color for the criterion by left-clicking on the Color box. Choose a color from the Color window that appears and click OK.
    • State the criterion for color-coding a gene in the Criterion field.
      • A criterion is stated with relationships such as "this column greater than this value" or "that column less than or equal to that value". Individual relationships can be combined using as many ANDs and ORs as needed. A typical relationship is
[ColumnName] RelationalOperator Value
with the column name always enclosed in brackets and character values enclosed in single quotes. For example:
[Fold Change] >= 2
[p value] < 0.05
[Quality] = 'high'
This is the equivalent to queries that you performed on the command line when working with the PostgreSQL movie database. GenMAPP is using a graphical user interface (GUI) to help the user format the queries correctly. The easiest and safest way to create criteria is by choosing items from the Columns and Ops (operators) lists shown in the Criteria Builder. The Columns list contains all of the column headings from your Expression Dataset. To choose a column from the list, click on the column heading. It will appear at the location of the cursor in the Criterion box. The Criteria Builder surrounds the column names with brackets.
The Ops (operators) list contains the relational operators that may be used in the criteria: equals ( = ) greater than ( > ), less than ( < ), greater than or equal to ( >= ), less than or equal to ( <= ), is not equal to ( <> ). To choose an operator from the list, click on the symbol. It will appear at the location of the insertion bar (cursor) in the Criterion box. The Criteria Builder automatically surrounds the operators with spaces.
The Ops list also contains the conjunctions AND and OR, which may be used to make compound criteria. For example:
[Fold Change] > 1.2 AND [p value] <= 0.05
Parentheses control the order of evaluation. Anything in parentheses is evaluated first. Parentheses may be nested. For example:
[Control Average] = 100 AND ([Exp1 Average] > 100 OR [Exp2 Average] > 100)
Column names may be used anywhere a value can, for example: 
[Control Average] < [Experiment Average]
  • After completing a new criterion, add the criterion entry (label, criterion, and color) to the Criteria List by clicking the Add button.
    • For the Vibrio dataset, you will create two criterion. "Increased" will be [Avg_LogFC_all] > 0.25 AND [Pvalue] < 0.05 and "Decreased will be [Avg_LogFC_all] < -0.25 AND [Pvalue] < 0.05.
    • You may continue to add criteria to the Color Set by using the previous steps.
      • The buttons to the right of the list represent actions that can be performed on individual criteria. To modify a criterion label, color, or the criterion itself, first select the criterion in the list by left-clicking on it, and then click the Edit button. This puts the selected criterion into the Criteria Builder to be modified. Click the Save button to save changes to the modified criterion; click the Add button to add it to the list as a separate criterion. To remove a criterion from the list, left-click on the criterion to select it, and then click on the Delete button. The order of Criteria in the list has significance to GenMAPP. When applying an Expression Dataset and Color Set to a MAPP, GenMAPP examines the expression data for a particular gene object and applies the color for the first criterion in the list that is true. Therefore, it is imperative that when criteria overlap the user put the most important or least inclusive criteria in the list first. To change the order of the criteria in the list, left-click on the criterion to select it and then click the Move Up or Move Down buttons. No criteria met and Not found are always the last two positions in the list.
  • Save the entire Expression Dataset by selecting Save from the Expression Dataset menu. Changes made to a Color Set are not saved until you do this.
  • Exit the Expression Dataset Manager to view the Color Sets on a MAPP. Choose Exit from the Expression Dataset menu or click the close box in the upper right hand corner of the window.
  • Upload your .gex file to your journal entry page for later retrieval.

MAPPFinder Procedure

Note: You and your partner will both do the same criterion, either "Increased" or "Decreased", but your group does not need to do both "Increased" and "Decreased" Sign up for the criterion you want on the group list ( Fall 2010 or Fall 2013) so that we can make sure that as a class we are covering both criteria.

  • Launch the MAPPFinder program (or from within GenMAPP, select Tools > MAPPFinder).
  • Make sure that the Gene Database for the correct species is loaded. The name of the Gene Database appears at the bottom of the window. If this is not the right one, go to File > Choose Gene Database and choose the correct one. (The Gene Databases are stored in the folder C:\GenMAPP 2 Data\Gene Databases\.)
  • Click on the button "Calculate New Results".
  • Click on "Find File" and choose the your Expression Dataset file, for example, "MyDataset.gex", and click OK.
    • MAPPFinder may have found it for you already if you already had it open in GenMAPP, in which case, you just need to click OK.
  • Choose the Color Set and Criteria with which to filter the data. Click on either the "Increased" and "Decreased" criteria in the right-hand box, depending on which one your group is doing. (You could select both by holding down the Control key while clicking).
  • Check the boxes next to "Gene Ontology" and "p value".
  • Click the "Browse" button and create a meaningful filename for your results.
  • Click "Run MAPPFinder". The analysis will take several minutes. It may look like the computer is stalled; be patient, it will eventually start running.
  • When the results have been calculated, a Gene Ontology browser will open showing your results. All of the Gene Ontology terms that have at least 3 genes measured and a p value of less than 0.05 will be highlighted yellow. A term with a p value less than 0.05 is considered a "significant" result. Browse through the tree to see your results.
  • To see a list of the most significant Gene Ontology terms, click on the menu item "Show Ranked List".
    • List the top 10 Gene Ontology terms in your individual journal entry.
    • Compare your list with your partner who used a different version of the Gene Database. Are your terms the same or different? Why do you think that is? Record your answer in your individual journal entry.
  • One of the things you can do in MAPPFinder is to find the Gene Ontology term(s) with which a particular gene is associated. First, in the main MAPPFinder Browser window, click on the button "Collapse the Tree". Then, you can search for the genes that were mentioned by Merrell et al. (2002), VC0028, VC0941, VC0869, VC0051, VC0647, VC0468, VC2350, and VCA0583. Type the identifier for one of these genes into the MAPPFinder browser gene ID search field. Choose "OrderedLocusNames" from the drop-down menu to the right of the search field. Click on the GeneID Search button. The GO term(s) that are associated with that gene will be highlighted in blue. List the GO terms associated with each of those genes in your individual journal. (Note: they might not all be found.) Are they the same as your partner who is using a different Gene Database? Why or why not?
  • Click on one of the GO terms that are associated with one of the genes you looked up in the previous step. A MAPP will open listing all of the genes (as boxes) associated with that GO term. The genes named within the map are based on the UniProt identification system. To match the gene of interest to its identification go to the UniProt site and type in your gene ID into the search bar. Moreover, the genes on the MAPP will be color-coded with the gene expression data from the microarray experiment. List in your journal entry the name of the GO term you clicked on and whether the expression of the gene you were looking for changed significantly in the experiment.
    • Double-click on the gene box. This will open a Internet Explorer window called the "Backpage" for this gene. This page has links to pages for this gene in the public databases. Click on the links to find out the function of this gene and record your answer in your individual journal page.
    • The MAPP that has just been created is stored in the directory, C:\GenMAPP 2 Data\MAPPs\VC GO. Upload this file and link to it in your journal.
  • In Windows, make a copy of your results (XXX-CriterionX-GO.txt) file.
    • "XXX" refers to the name you gave to your results file.
    • "CriterionX" refers to either "Criterion0" or "Criterion1". Since computers start counting at zero, "Criterion0" is the first criterion in the list you clicked on ("Increased" if you followed the directions) and "Criterion1" is the second criterion in the list you clicked on ("Decreased" if you followed the directions).
    • Upload your results file to your journal page.
  • Launch Microsoft Excel. Open the copies of the .txt files in Excel (you will need to "Show all files" and click "Finish" to the wizard that will open your file). This will show you the same data that you saw in the MAPPFinder Browser, but in tabular form.
  • Look at the top of the spreadsheet. There are rows of information that give you the background information on how MAPPFinder made the calculations. Compare this information with your partner who used a different version of the Vibrio Gene Database. Which numbers are different? Why are they different? Record this information in your individual journal entry.
  • You will filter this list to show the top GO terms represented in your data for both the "Increased" and "Decreased" criteria. You will need to filter your list down to about 20 terms. Click on a cell in the row of headers for the data. Then go to the Data menu and click "Filter > Autofilter". Drop-down arrows will appear in the row of headers. You can now choose to filter the data. Click on the drop-down arrow for the column you wish to filter and choose "(Custom…)". A window will open giving you choices on how you want to filter. You must set these two filters:
Z Score (in column N) greater than 2
PermuteP (in column O) less than 0.05
You will use these two filters depending on the number of terms you have:
Number Changed (in column I) greater than or equal to 4 or 5 AND less than 100
Percent Changed (in column L) greater than or equal to 25-50%
  • Save your changes to an Excel spreadsheet. Select File > Save As and select Excel workbook (.xls) from the drop-down menu. Your filter settings won’t be saved in a .txt file.
  • Are any of your filtered GO terms closely related to one another, meaning are they a direct child or parent to another term in the list? You can judge this by comparing your spreadsheet with the MAPPFinder browser. Highlight the terms that fit this relationship with the same color in your Excel spreadsheet. Upload your .xls file to your journal page.
  • Interpret your results. Look up the definitions for any GO terms that are unfamiliar to you. The "official" definitions for GO terms can be found at http://www.geneontology.org. You can use one of the online biological dictionaries as a supplement, if needed. Write a paragraph relating the results of this GO analysis to the experiment performed (comparing laboratory-grown and patient-derived Vibrio cholerae. You need to give a biological interpretation of what do each of these GO terms in your filtered list have to to with the pathogenecity of the bacterium? You may consult with your partner on this, but your explanation on your individual journal page needs to be in your own words. This is where the real "brain power" comes in with interpreting DNA microarray data. Even experienced scientists struggle with this part. Use your creativity as a scientist to stretch your brain in this question.
  • There is one other file you need to save to your journal page. It has a .gmf extension and should be in the same fold as the .gex file that you created with the GenMAPP Expression Dataset Manager. You will need this file to re-open your results in MAPPFinder.

Conclusion

  • Write a paragraph that briefly summarizes and gives a scientific conclusion for the work that you did this week.

Optional: downloading and installing the GenMAPP and MAPPFinder Software

  • We will be using GenMAPP and MAPPFinder version 2.1 (http://genmapp.org). This software is Windows-only and is already installed on the machines in the Seaver 120 computer lab.
    • This version is now called "GenMAPP Classic" and can be downloaded from this page.
    • Follow the instructions in the installer.
    • During installation, the installer will open a window called the GenMAPP Data Acquisition Tool. It will not function because it cannot connect to the server. This is OK, you will download your Vibrio cholerae Gene Database from the XMLPipeDB project at SourceForge.org.
  • Click on the link for the Gene Database to which you have been assigned, download the file, and save it into the folder C:\GenMAPP 2 Data\Gene Databases (if you accepted the default folders during the installation), and extract it.

Links

Nicole Anguiano
BIOL 367, Fall 2015

Assignment Links
Individual Journals
Shared Journals
Retrieved from "https://xmlpipedb.lmucs.io/biodb/fall2015/index.php?title=Nanguiano_Week_8&oldid=2640"